Synthesis and Characterization of Glycidyl Methacrylate-Grafted Ethylene-Propylene Diene Terpolymer Employing Styrene as a Comonomer

Document Type : Original Article

Authors
1 Chemistry & Chemical Engineering Technical Centre, Academic Centre for Education, Culture and Research (ACECR), Isfahan University of Technology branch, Isfahan, Iran
2 Chemical, Polymeric and Petrochemical Technology Development Research Division, Research Institute of Petroleum Industry, Tehran, Iran
20.1001.1/jgt.2024.2020577.1032
Abstract
Melt free-radical grafting reactions between ethylene-propylene-diene terpolymer (EPDM) and glycidyl methacrylate (GMA) were studied in a batch mixer at 170°C and 60rpm, with and without styrene (St) comonomer. Effect of dicumyl peroxide (DCP) initiator, GMA and styrene concentrations were studied on the grafted EPDM characteristics. Titration results indicated an increase in the graft degree (GD) and gel content (GC) values with increasing DCP concentration. Whereas, introduction of St led to 132% increase in GD and 39% decrease in GC which might be ascribed to its effect on restricting crosslinking side-reaction. FTIR spectrums confirmed that GMA has been successfully grafted onto EPDM.

Keywords

Subjects


Article Title Persian

سنتز و مشخصه‌یابی اتیلن پروپیلن دی ان مونومر پیوند خورده با گلایسیدیل متاکریلات از طریق کومونومر استایرن

Authors Persian

مرضیه علیدادی شمس آبادی 1
شیرین شکوهی 2
1 مرکز فنی شیمی و مهندسی شیمی، جهاد دانشگاهی واحد صنعتی اصفهان، اصفهان، ایران
2 پژوهشکده توسعه فناوری‌های شیمیایی، پلیمری و پتروشیمیایی، پژوهشگاه صنعت نفت، تهران، ایران
Abstract Persian

واکنش پیوند رادیکال آزاد مذاب بین اتیلن-پروپیلن-دی ان مونومر (EPDM) و گلیسیدیل متااکریلیت (GMA) در حضور و غیاب کومونومر استایرن (St) در مخلوط‌کن داخلی (۱۷۰ سیلسیوس، ۶۰ دور بر دقیقه) بررسی شد. اثر غلظت آغازگر دی کیومیل پراکساید (DCP)، GMA و St بر پیوند بین EPDM و GMA مطالعه شد. نتایج تیتراسیون افزایش مقادیر درجه پیوند (GD) و میزان ژل (GC) را با افزایش غلظت DCP نشان داد. در حالی که کاربرد St، با جلوگیری از ورود ماکرورادیکال‌ها به واکنش جانبی ژل شدن، منجر به افزایش ۱۳۹% برای GD و کاهش ۳۹% برای GC شد. نتایج FTIR پیوند GMA بر روی زنجیره‌های EPDM را تائید کرد.

Keywords Persian

پیوند رادیکال آزاد
گلایسیدیل متاکریلات
اتیلن-پروپیلن-دی ان مونومر
کومونومر
میزان ژل
Al-Malaika, S. and W. Kong, 2001. Reactive processing of polymers: Melt grafting of glycidyl methacrylate on ethylene propylene copolymer in the presence of a coagent. J. Appl. Polym. Sci. 79, 1401-1415.
Alidadi-Shamsabadi, M., A. Arefazar, and S. Shokoohi, 2020. IMPROVEMENTS IN THE SYNTHESIS AND CHARACTERIZATION OF GLYCIDYL METHACRYLATE–GRAFTED EPDM THROUGH MELT FREE-RADICAL PROCESS. Rubber chem. technol. 93, 222-234.
Bansod, N.D., et al., 2018. FUNCTIONALIZATION OF EPDM RUBBER TOWARD BETTER SILICA DISPERSION AND REINFORCEMENT. Rubber Chem. Technol. 92, 219-236.
Bray, T., et al., 1998. Developments in the synthesis of maleated polyolefins by reactive extrusion. Macromol. Symp. 129, 109-118.
Brito, G.F., et al., 2014. Enhanced melt free radical grafting efficiency of polyethylene using a novel redox initiation method. RSC Advances 4, 26425-26433.
Doudin, K., A. Ahmad, and S. Al-Malaika, 2009. Reactive processing of polymers: Structural characterisation of products by 1H and 13C NMR spectroscopy for glycidyl methacrylate grafting onto EPR in the absence and presence of a reactive comonomer. Polym. Degrad. Stab. 94, 1599-1614.
Gross, I.P., et al., 2018. Polylactic acid, maleic anhydride and dicumyl peroxide: NMR study of the free-radical melt reaction product. Polym. Degrad. Stab. 155, 1-8.
Hu, G.-H., Flat J.J., and Lambla M., 2012. Free-radical grafting of monomers onto polymers by reactive extrusion: principles and applications, in Reactive modifiers for polymers, Springer Science & Business Media, London.
Jazani, O.M., et al., 2017. An investigation on the role of GMA grafting degree on the efficiency of PET/PP-g-GMA reactive blending: morphology and mechanical properties. Polym. Bull. 74, 4483-4497.
Li, C., Y. Zhang, and Y. Zhang, 2003. Melt grafting of maleic anhydride onto low-density polyethylene/polypropylene blends. Polym. Test. 22, 191-195.
Ma, P., et al., 2014. Styrene-assisted melt free-radical grafting of maleic anhydride onto poly (β-hydroxybutyrate). Polym. Degrad. Stab. 100, 93-100.
Marsilla, K.K. and C. Verbeek, 2015. Modification of poly (lactic acid) using itaconic anhydride by reactive extrusion. Eur. Polym. J. 67, 213-223.
Oxley, A., et al., 2022. Graft modification of polybenzimidazole membranes for organic solvent ultrafiltration with scale up to spiral wound modules. J. Membr. Sci. 647, 120199.
Passaglia, E., S. Coiai, and S. Augier, 2009. Control of macromolecular architecture during the reactive functionalization in the melt of olefin polymers. Prog. Polym. Sci. 34, 911-947.
Sun, W., et al., 2020. Chemical surface modification of polymeric biomaterials for biomedical applications. Macromol. Rapid Commun. 41, 1900430.