Austrheim, T. (2006). Experimental characterization of high-pressure natural gas scrubbers, PhD thesis, University of Bergen.
Brar, L. S., Sharma, R. P., & Elsayed, K., 2015. The effect of the cyclone length on the performance of Stairmand high-efficiency cyclone. Powder Technology, 286, 668-677. https://doi.org/10.1016/j.powtec.2015.09.003.
Brar, L. S., & Elsayed, K., 2017. Analysis and optimization of multi-inlet gas cyclones using large eddy simulation and artificial neural network. Powder Technology, 311, 465-483.
https://doi.org/10.1016/j.powtec.2017.02.004.
Brar, L. S., & Elsayed, K., 2018. Analysis and optimization of cyclone separators with eccentric vortex finders using large eddy simulation and artificial neural network. Separation and Purification Technology, 207, 269-283.
https://doi.org/10.1016/j.seppur.2018.06.013
Babaoğlu, N. U., Parvaz, F., Hosseini, S. H., Elsayed, K., & Ahmadi, G., 2021. Influence of the inlet cross-sectional shape on the performance of a multi-inlet gas cyclone. Powder Technology, 384, 82-99. https://doi.org/10.1016/j.powtec.2021.02.008
Babaoğlu, N. U., Parvaz, F., Foroozesh, J., Hosseini, S. H., Ahmadi, G., & Elsayed, K., 2023. Geometry optimization of axial cyclone for high performance and low acoustic noise. Powder Technology, 427, 118738. https://doi.org/ 10.1016/j.powtec.2023.118738
Deng, Y., Yu, B., & Sun, D., 2020. Multi-objective optimization of guide vanes for axial flow cyclone using CFD, SVM, and NSGA II algorithm. Powder Technology, 373, 637-646.
https://doi.org/10.1016/j.powtec.2020.06.078
Dehdarinejad, E., Bayareh, M., Parvaz, F., Hosseini, S. H., & Ahmadi, G., 2023. Performance analysis of a gas cyclone with a converging-diverging vortex finder. Chemical Engineering Research and Design, 193, 587-599.
https://doi.org/10.1016/j.cherd.2023.04.012
Elsayed, K., & Lacor, C., 2010. Optimization of the cyclone separator geometry for minimum pressure drop using mathematical models and CFD simulations. Chemical Engineering Science, 65(22), 6048-6058.
https://doi.org/10.1016/j.ces.2010.08.042
Elsayed, K., Parvaz, F., Hosseini, S. H., & Ahmadi, G., 2020. Influence of the dipleg and dustbin dimensions on performance of gas cyclones: An optimization study. Separation and Purification Technology, 239, 116553.
https://doi.org/10.1016/j.seppur.2020.116553
Foroozesh, J., Parvaz, F., Hosseini, S. H., Ahmadi, G., Elsayed, K., & Babaoğlu, N. U., 2021. Computational fluid dynamics study of the impact of surface roughness on cyclone performance and erosion. Powder Technology, 389, 339-354.
https://doi.org/10.1016/j.powtec.2021.05.041
Gimbun, J., Chuah, T. G., Choong, T. S., & Fakhru’l-Razi, A., 2005. Prediction of the effects of cone tip diameter on the cyclone performance. Journal of Aerosol Science, 36(8), 1056-1065.
https://doi.org/10.1016/j.jaerosci.2004.10.014
Hsiao, T. C., Chen, D., Greenberg, P. S., & Street, K. W., 2011. Effect of geometric configuration on the collection efficiency of axial flow cyclones. Journal of Aerosol Science, 42(2), 78-86.
https://doi.org/10.1016/j.jaerosci.2010.11.004
Hsu, Y. D., Chein, H. M., Chen, T. M., & Tsai, C. J., 2005. Axial flow cyclone for segregation and collection of ultrafine particles: theoretical and experimental study. Environmental science & technology, 39(5), 1299-1308.
https://doi.org/10.1021/es0491735
Huang, L., Deng, S., Chen, Z., Guan, J., & Chen, M. (2018). Numerical analysis of a novel gas-liquid pre-separation cyclone. Separation and Purification Technology, 194, 470-479. https://doi.org/10.1016/j.seppur.2017.11.050
Karagoz, I., & Kaya, F. (2007). CFD investigation of the flow and heat transfer characteristics in a tangential inlet cyclone. International Communications in Heat and Mass Transfer, 34(9-10), 1119-1126. https://doi.org/10.1016/j.icheatmasstransfer.2007.05.017
Kaya, F., Karagoz, I., & Avci, A. (2011). Effects of surface roughness on the performance of tangential inlet cyclone separators. Aerosol science and technology, 45(8), 988-995.
https://doi.org/10.1080/02786826.2011.574174
Kumar, D., & Hassanpour, A. (2024). Recent advances in cyclone separator modeling: A review on wall roughness and erosion. Powder Technology, 432, 118945. https://doi.org/10.1016/j.powtec.2023.118945
Li, J., Wang, T., Zhang, L., Chang, J., Song, Z., & Ma, C. (2020). Multi-objective optimization of axial-flow-type gas-particle cyclone separator using response surface methodology and computational fluid dynamics. Atmospheric Pollution Research, 11(9), 1487-1499. https://doi.org/10.1016/j.apr.2020.06.002
Li, W., Huang, Z., & Li, G. (2023). Improvement of the cyclone separator performance by the wedge-shaped roof: A multi-objective optimization study. Chemical Engineering Science, 268, 118404.
https://doi.org/10.1016/j.ces.2023.118404
Li, M., Zhao, Y., & Chen, W. (2024). A comparative study on the effect of wall surface coatings on erosion in industrial cyclones. Chemical Engineering Journal, 465, 142387. https://doi.org/10.1016/j.cej.2023.142387
Liu, G., Wang, W., Yu, J., & Li, X. (2022). Effect of extra inlets structure on cyclone wall erosion. Powder Technology, 411, 117926. https://doi.org/10.1016/j.powtec.2022.117926
Mao, Y., Pu, W., Zhang, H., Zhang, Q., Song, Z., Chen, K., & Han, D. (2019). Orthogonal experimental design of an axial flow cyclone separator. Chemical Engineering and Processing-Process Intensification, 144, 107645. https://doi.org/10.1016/j.cep.2019.107645
Morsi, S. A. J., & Alexander, A. J. (1972). An investigation of particle trajectories in two-phase flow systems. Journal of Fluid mechanics, 55(2), 193-208. https://doi.org/10.1017/S0022112072001806
Ogawa, A., Iwanami, T., & Shono, H. (1997). Estimation of the collection efficiency of the axial flow cyclone dust collector with the fixed guide vanes. Journal of Thermal Science, 6, 58-65. https://doi.org/10.1007/s11630-997-0017-2
Oka, Y. I., Okamura, K., & Yoshida, T. (2005). Practical estimation of erosion damage caused by solid particle impact: Part 1: Effects of impact parameters on a predictive equation. Wear, 259(1-6), 95-101. https://doi.org/10.1016/j.wear.2005.01.039
Oka, Y. I., & Yoshida, T. (2005). Practical estimation of erosion damage caused by solid particle impact: Part 2: Mechanical properties of materials directly associated with erosion damage. Wear, 259(1-6), 102-109. https://doi.org/10.1016/j.wear.2005.01.040
Parvaz, F., Hosseini, S. H., Ahmadi, G., & Elsayed, K. (2017). Impacts of the vortex finder eccentricity on the flow pattern and performance of a gas cyclone. Separation and Purification Technology, 187, 1-13. https://doi.org/10.1016/j.seppur.2017.06.045
Parvaz, F., Vahedi, S. M., & Khandan, M. (2018). Numerical investigation of the effects of geometry variation on the flow pattern and performance of Gas-Particle cyclones. Iranian Journal of Mechanical Engineering Transactions of ISME, 19(4), 101-122. https://doi.org/10.22060/ijme.2018.14439.5724
Parvaz, F., Rafee, R., & Talebi, F. (2018). Effects of the Outlet Pipe Diameter on the Performance of Aerocyclone in Gas Droplet Two-Phase Flow. https://doi.org/10.1016/j.cep.2019.107645
Parvaz, F., Hosseini, S. H., Elsayed, K., & Ahmadi, G. (2018). Numerical investigation of effects of inner cone on flow field, performance and erosion rate of cyclone separators. Separation and Purification Technology, 201, 223-237. https://doi.org/10.1016/j.seppur.2018.03.030
Parvaz, F., Hosseini, S. H., Elsayed, K., & Ahmadi, G. (2020). Influence of the dipleg shape on the performance of gas cyclones. Separation and Purification Technology, 233, 116000. https://doi.org/10.1016/j.seppur.2019.116000
Parvaz, F., Hosseini, S. H., Bastan, A. R., Foroozesh, J., Babaoğlu, N. U., Elsayed, K., & Ahmadi, G. (2023). Influence of gas exhaust geometry on flow pattern, performance, and erosion rate of a gas cyclone. Korean Journal of Chemical Engineering, 40(7), 1587-1597.
https://doi.org/10.1007/s11814-023-1430-2
Rahimi, A., & Singh, P. (2025). CFD-based optimization of axial cyclone geometry for dual-phase separation. Journal of Fluids Engineering, 147(3), 031501. https://doi.org/10.1115/1.4054932
Vahedi, S. M., Parvaz, F., Kamali, M., & Jafari Jebeli, H. (2018). Numerical investigation of the impact of inlet channel numbers on the flow pattern, performance, and erosion of gas-particle cyclone. Iranian Journal of Oil and Gas Science and Technology, 7(4), 59-78. https://doi.org/10.22050/ijogst.2018.16066.1300
Vahedi, S. M., Parvaz, F., Rafee, R., & Khandan Bakavoli, M. (2018). Computational fluid dynamics simulation of the flow patterns and performance of conventional and dual-cone gas-particle cyclones. Journal of Heat and Mass Transfer Research, 5(1), 27-38. https://doi.org/10.22075/jhmtr.2017.11918.1170
Vahedi, S. M., Parvaz, F., Khandan Bakavoli, M., & Kamali, M. (2020). Effect of Surface Roughness on Vortex Length and Efficiency of Gas-oil Cyclones through CFD Modelling. Iranian Journal of Oil and Gas Science and Technology, 9(1), 68-84. https://doi.org/10.22050/ijogst.2020.19460.1543
Xiong, Z., Ji, Z., & Wu, X. (2014). Development of a cyclone separator with high efficiency and low pressure drop in axial inlet cyclones. Powder Technology, 253, 644-649. https://doi.org/10.1016/j.powtec.2013.12.016
Zhang, S., Shin, M., & Shin, W. G. (2021). Comparison of models to predict the collection efficiency of an axial cyclone with a spindle vane. Journal of Aerosol Science, 157, 105817. https://doi.org/10.1016/j.jaerosci.2021.105817
تکنولوژی گاز